Description
IEC 60695-2-13:2010+A1:2014 specifies the details of the glow-wire test to be applied to test specimens of solid electrical insulating materials or other solid materials for ignitability testing to determine the glow-wire ignition temperature (GWIT). The GWIT is the temperature which is 25 K (or 30 K) higher than the maximum test temperature, determined during this standardized procedure, at which the tested material does not ignite, or if sustained and continuous flaming combustion does not occur for a time longer than 5 s for any single flame event and the specimen is not totally consumed. This second edition of IEC 60695-2-13 cancels and replaces the first edition published in 2000. It also constitutes a technical revision. The main changes with respect to the previous edition are:
– modified title;
– addition of an Introduction;
– clarification of Scope;
– expansion of Clause 2: Normative references;
– expansion of Clause 3;
– revision of Clause 4 to alignment with the IEC 60695-11 series to introduce guidance on test programs for material variations;
– clarification of Clause 8: Conditioning (now Clause 7);
– deletion of Clause 9: Initial measurement;
– expansion of Clause 10: Test procedures (now Clause 8);
– expansion of Clause 11: Observation and measurement (now Clause 9);
– clarification of Clause 12: Evaluation of test results (now Clause 10);
– expansion of Clause 13: Test report (now Clause 11).
This standard has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51.
This publication is to be read in conjunction with IEC 60695-2-10:2000. This consolidated version consists of the second edition (2010) and its amendment 1 (2014). Therefore, no need to order amendment in addition to this publication.
Product Details
- Edition:
- 2.1
- Published:
- 02/12/2014
- Number of Pages:
- 51
- File Size:
- 1 file , 390 KB
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
