AWWA MTC64531 PDF

$14.00

A Mechanistic Study on the Boron Rejection by Seawater Reverse Osmosis Membranes
Conference Proceeding by American Water Works Association, 03/01/2007

Document Format: PDF

Description

Theobjective of this study was to develop a mechanistic model that predicts boron rejectionperformance under varying operating conditions such as pH and temperature with thegoal of developing a tool for process design and operation optimization with higher boronremoval. Bench scale cross-flow filtration experiments were performed to evaluate therejection of boron as well as that of major ionic species (Na, Cl, Ca, Mg and SO<sub>4</sub>) SR(Saehan Industries, Inc., Korea) seawater reverse osmosis (SWRO) membrane. The test unit was equipped with plat-and-frame test cells (73 mm length ? 38 mm width ? 5 mm height). Feed water stored ina 40 L polypropylene tank was circulated and pressurized through the cells by a positive-displacementhigh-pressure pump (Hydra-Cell D10S, Wanner Engineering, Minneapolis,MN). Feed pressure to the cell was controlled by a needle valve (Swagelok, Solon, OH)located downstream of the cells. To prevent the over-pressurization of the system,pressure regulating valve (C22AB, Wanner Engineering, Minneapolis, MN) was installednext to the pump outlet. The valve can regulate pressure by automatically bypassing apart of the feed flow if the system pressure exceeds the preset pressure. Bypass and feedflow rate was measured by hydraulic flow meter (King, Atlanta, GA). Pressure wasmeasured with analogue gauges (Swagelok, Solon, OH) before and after the test cells. Atemperature controller (Polystat, Cole parmer, Vernon Hills, IL) circulated the waterthrough the heat-exchange coil immersed inside the feed tank to control the temperature.All experimental components were made of stainless steel 316 and/or Teflon® to avoidcorrosion. The experiments were carried out with synthetic seawater (10,500 mg/LSodium, 19,000 mg/L Chloride, 1,350 mg/L Magnesium, 450 mg/L Calcium, and 2,700mg/L Sulfate) spiked with 5 mg/L of boron, following an orthogonal matrix of varyingoperating pressures (600 to 1,000 psi), pHs (6.2 to 9.5), and temperatures (15 to 30 ºC).Boron, sodium, calcium and magnesium concentrations of feeds and permeates weremeasured using Inductively Coupled Plasma Mass Spectrometer-Atomic EmissionSpectrophotometer (Model ICAP 61E Trace Analyzer, Thermo Jarrell Ash, Franklin,MA). Chloride and sulfate concentrations were measured with a Dionex DX-600 ionchromatography system (Sunnyvale, CA) installed with IonPac AS16 analytical column(4 mm x 250 mm). Includes 10 references, figure.

Product Details

Edition:
Vol. – No.
Published:
03/01/2007
Number of Pages:
7
File Size:
1 file , 1.4 MB
Note:
This product is unavailable in Ukraine, Russia, Belarus